The fibaro dimmer 2 is one of the best z-wave dimmer available for incandescent bulbs, 230V halogen, 12V halogen and dimmable LEDs and can be used with momentary, toggle and 3-position switches. The new Dimmer 2 is a true universal dimmer - automatically selects the correct dimming type whether that's trailing-edge or leading-edge based on the bulb type used. No more guessing and experimenting different configurations to make it work with your LEDs.
Newest generation of module fully Z-Wave Plus certified - offering increased range, extended battery life and Over The Air upgrading (OTA).
z-wave and local control of the light is possible and the Z-Wave controller will be able to override the manual switch. Designed to be hidden away behind existing wall switch and works with or without neutral lead. Its compact size means that it can be fitted inside wall boxes, directly behind a wall switch or can located anywhere between the switch and load.
If you don't have a neutral wire at the wall switch the dimmer requires a minimum load of 50W on the lighting circuit otherwise you will need to use a dimmer bypass for load less than 50W.
Easily transform your existing light switch to an automated one.
♦ Dimming and control On/Off control of home lighting
♦ 2 or 3 wire system and installation by qualified electrican only
♦ Optimised antenna range for indoor use, up to 20m
♦ Min 50W (if no neutral wire) to 250W circuit 240V
♦ Z-Wave RF frequency 921.42MHz (Aus/NZ)
♦ Z-wave and manual operations
♦ Integrates with all certified AUS/NZ Z-Wave controllers
♦ Small form factor that can be easily hidden away (42 x 37 x 17mm)